Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
240
The fields that can be configured in URPF Port Settings are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the range of ports that will be used for this configuration here.
Reachable Via
Specifies how URPF verifies if the source address is present in the routing table of
incoming packets (sometimes referred to as the loose mode).
IP Access List Name
Enter the name of the IP access list that will be used in the URPF check here. This
string can be up to 32 characters long.
IPv6 Access List Name
Enter the name of the IPv6 access list that will be used in the URPF check here.
This string can be up to 32 characters long.
Click the Apply button to accept the changes made.
RIP
RIP Settings
This window is used to display and configure Routing Information Protocol (RIP) settings.
To view the following window, click L3 Features > RIP > RIP Settings, as shown below:
Figure 6-28 RIP Settings Window
Loading ...
Loading ...
Loading ...