Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
245
RIPng
RIPng Settings
This window is used to display and configure the Routing Information Protocol Next Generation (RIPng) settings, also
known as IPv6 RIP.
To view the following window, click L3 Features > RIPng > RIPng Settings, as shown below:
Figure 6-33 RIPng Settings Window
The fields that can be configured in RIPng Global Settings are described below:
Parameter Description
Global State
Select to globally enable or disable the RIPng feature here.
Click the Apply button to accept the changes made.
The fields that can be configured in RIPng Settings are described below:
Parameter Description
Default Metric
Enter the default metric value here. The range is from 1 to 16. This value is used to
specify the default metric for routes redistributed from other routing protocols. If the
routes being redistributed are learned from other protocols, then they have an
incompatible metric with IPv6 RIP. Re-specifying of metric allows the metric to be
synced. By default, this value is 0.
Select the Default option to use the default metric value.
Distance
Enter the administrative distance for RIPng here. The range is from 1 to 254. The
distance value represents the trust rating of the route. The route with a lower
distance value is preferred over the route with the higher distance value. By
default, this value is 120.
Select the Default option to use the default administrative distance for RIPng.
Update Timer
Enter the update interval value at which the update message is sent here. The
range is from 5 to 65535 seconds. By default, this value is 30 seconds.
Loading ...
Loading ...
Loading ...