Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
107
The fields that can be configured in SIM Role Configure are described below:
Parameter Description
Role State
Select to change the SIM role of the Switch. Options to choose from are:
• Candidate - A Candidate Switch (CaS) is not the member of a SIM group
but is connected to a Commander Switch.
• Commander - Select to make the Switch a Commander Switch (CS). The
user may join other Switches to this Switch, over Ethernet, to be part of the
SIM group. Choosing this option will also enable the Switch to be configured
for SIM.
By default, the Candidate option is used.
Group Name
Enter a group name. This is optional. This name is used to segment Switches into
different SIM groups.
Click the Apply button to accept the changes made.
The fields that can be configured in SIM Settings are described below:
Parameter Description
Trap State
Select to enable or disable the SIM trap state here.
Interval
Enter the interval in seconds. The range is from 30 to 90.
Hold Time
Enter the hold-time in seconds. The range is from 100 to 255.
Management VLAN
Enter the single IP management message VLAN ID.
Click the Apply button to accept the changes made.
After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then contain four
added links to aid in configuring SIM through the Web UI, including Topology, Firmware Upgrade, Configuration
File Backup/Restore, and Upload Log File.
Loading ...
Loading ...
Loading ...