D-Link DGS-1520 Dgs-1210 Smart Managed Gigabit Switches

User Manual - Page 552

For DGS-1520.

PDF File Manual, 598 pages, Read Online | Download pdf file

DGS-1520 photo
Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
542
Log Description Severity
Parameters Description:
interface-id: Interface name.
vid: VLAN ID.
Event Description: When an interface leaves the surveillance VLAN and at the same time,
no surveillance device is detected in the aging interval for that interface, the log message
will be sent.
Log Message: <interface-id> remove from surveillance VLAN <vid>
Parameters Description:
interface-id: Interface name.
vid: VLAN ID.
Informational
BPDU Protection
Log Description Severity
Event Description: Record the event when the BPDU attack happened.
Log Message: <interface-id> enter STP BPDU under protection state (mode: <mode>)
Parameters Description:
interface-id: Interface on which detected STP BPDU attack.
mode: BPDU Protection mode of the interface. Mode can be drop, block, or shutdown.
Informational
Event Description: Record the event when the STP BPDU attack recovered.
Log Message: <interface-id> recover from BPDU under protection state
Parameters Description:
interface-id: Interface on which detected STP BPDU attack.
Informational
Configuration/Firmware
Log Description Severity
Event Description: Firmware upgraded successfully.
Log Message: [Unit <unitID>,]Firmware upgraded by <session> successfully (Username:
<username>[, IP: <ipaddr>, MAC: <macaddr>], Server IP: <serverIP>, File Name:
<pathFile>)
Parameters Description:
unitID: The unit ID.
session: The user’s session.
username: The current login user.
ipaddr: The client IP address.
macaddr: The client MAC address.
serverIP: Server IP address.
pathFile: Path and file name on server.
Informational
Event Description: Firmware upgraded unsuccessfully.
Log Message: [Unit <unitID>,]Firmware upgraded by <session> unsuccessfully (Username:
<username>[, IP: <ipaddr>, MAC: <macaddr>], Server IP: <serverIP>, File Name:
<pathFile>)
Parameters Description:
unitID: The unit ID.
session: The user’s session.
username: The current login user.
ipaddr: The client IP address.
Warning
Loading ...
Loading ...
Loading ...