Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
265
After clicking the Process ID link (1) in the table, the following page will appear.
Figure 6-55 OSPFv3 Process Settings (Process ID) Window
Click the OK button to close the window and return to the previous window.
OSPFv3 Passive Interface Settings
This window is used to display and configure the OSPFv3 passive interface settings. If an interface is passive, the
OSPF routing update packets are not sent or received through the specified interface.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Passive Interface Settings, as
shown below:
Figure 6-56 OSPFv3 Passive Interface Settings Window
The fields that can be configured are described below:
Parameter Description
Process ID
Enter the OSPFv3 process ID here. The range is from 1 to 65535.
Interface Name
Enter the passive interface name here. This name can be up to 12 characters long.
Select the Default option specify all the interfaces as passive interfaces.
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.
Click the Find button to locate a specific entry based on the information entered.
Loading ...
Loading ...
Loading ...