Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
325
IPMC
IP Multicast Global Settings
This window is used to display and configure the global IP Multicast (IPMC) settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast Global
Settings, as shown below:
Figure 6-129 IP Multicast Global Settings Window
The fields that can be configured in IP Multicast Routing Global State are described below:
Parameter Description
Global State
Select to globally enable or disable the IP multicast routing feature here. When IP
multicast routing is disabled, the system will stop routing multicast packets even
though the multicast routing protocol is enabled.
Click the Apply button to accept the changes made.
The fields that can be configured in IP Multicast Table Lookup Mode are described below:
Parameter Description
Table Lookup Mode
Select the IP multicast forwarding lookup mode here. Options to choose from are:
• IP - Specifies multicast forwarding lookup based on the IP address.
• MAC - Specifies multicast forwarding lookup based on the MAC address.
Click the Apply button to accept the changes made.
The fields that can be configured in IP Multicast Boundary are described below:
Parameter Description
VID
Enter the VLAN ID that will be used here. The range is from 1 to 4094.
ACL Name
Enter the name of the standard IP access list that will be used here. This name
can be up to 32 characters long. Click the Please Select button to select a pre-
configured access list and use it here.
Loading ...
Loading ...
Loading ...