Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
312
PIM for IPv6 RP Embedded Settings
This window view and configure the IPv6 PIM embedded settings. Embedded RP defines an address allocation policy
in which the address of the RP is encoded in an IPv6 multicast group address. This allows an easy deployment of
scalable inter-domain multicast and simplifies the intra-domain multicast configuration as well. IPv6 Multicast group
addresses embedded with RP information start with ff70::/12 where the flag value of 7 means embedded RP.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 RP Embedded Settings, as shown below:
Figure 6-111 PIM for IPv6 RP Embedded Settings Window
The fields that can be configured are described below:
Parameter Description
RP Embedded
Select to enable or disable the RP embedded feature here.
Click the Apply button to accept the changes made.
PIM for IPv6 RP Table
This window is used to find and display IPv6 PIM RP information.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 RP Table, as shown below:
Figure 6-112 PIM for IPv6 RP Table Window
The fields that can be configured are described below:
Parameter Description
Group Address/Prefix
Length
Enter the multicast group IPv6 address and prefix length here.
Source
Select the source to display here. Options to choose from are:
• Bootstrap - Specifies to display ranges learned through the BSR.
• Embedded RP - Specifies to display group ranges learned through the
embedded rendezvous point (RP).
• Static - Specifies to display ranges enabled by static configuration.
Click the Find button to locate a specific entry based on the information entered.
Loading ...
Loading ...
Loading ...