Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
238
Click the Apply button to accept the changes made.
IPv6 General Prefix
This window is used to display and configure the VLAN interface IPv6 general prefix settings.
To view the following window, click L3 Features > IPv6 General Prefix, as shown below:
Figure 6-26 IPv6 General Prefix Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN
Enter the VLAN interface ID used here. The range is from 1 to 4094.
Prefix Name
Enter the IPv6 general prefix entry name here. This name can be up to 12
characters long.
IPv6 Address
Enter the IPv6 address and prefix length here. The prefix length of the IPv6
address is also the local subnet on the VLAN interface.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the IPv6 general prefix entries in the table.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
URPF Settings
This window is used to display and configure the Unicast Reverse Path Forwarding (URPF) settings. One common
method to initiate an attack on a network is to utilize IPv4/IPv6 source address spoofing. When using this method,
traffic is sent into the network with a source address that is known or trusted by the target. If no protection exists, the
Loading ...
Loading ...
Loading ...