Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
266
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
OSPFv3 Area Settings
This window is used to display and configure the OSPFv3 area settings.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Area Settings, as shown below:
Figure 6-57 OSPFv3 Area Settings Window
The fields that can be configured in OSPFv3 Area Settings are described below:
Parameter Description
Process ID
Enter the process ID of the OSPF area used here. The range is from 1 to 65535.
OSPF Area ID
Enter the OSPF area ID used here. It can be specified as an IPv4 address.
Range
Select this option to consolidate and summarize routes at an area boundary. This
feature is used only with ABRs. It is used to consolidate or summarize routes for
an area. The result is that a single summary route is advertised to other areas by
the ABR. Routing information is condensed at area boundaries. External to the
area, a single route is advertised for each address range.
Area Range IPv6 Prefix After selecting the Range option, enter the OSPF area range IPv6 prefix and prefix
length here.
Advertise After selecting the Range option, select the advertise option here. Options to
choose from are:
• Advertise - Specifies to advertise and generate an inter-area prefix LSA for
the specified address range.
• No Advertise - Specifies to set the status to Do-Not-Advertise for the
specified address range. The inter-area prefix LSA is suppressed, and the
component networks remain hidden from other networks.
Stub
Select this option to define an area as a Stub area.
Metric After selecting the Stub option, enter the stub area metric value here. The range is
from 0 to 65535.
Loading ...
Loading ...
Loading ...