Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
354
The fields that can be configured are described below:
Parameter Description
Class Map Name
Enter the class map name here. This name can be up to 32 characters long.
Multiple Match Criteria Select the multiple match criteria option here. Options to choose from are Match
All and Match Any.
Click the Apply button to accept the changes made.
Click the Match button to configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Match button, the following page will be available.
Figure 7-13 Class Map (Match) Window
The fields that can be configured are described below:
Parameter Description
None
Select this option to match nothing to this class map.
Specify
Select the option to match something to this class map.
ACL Name
Select and enter the access list name that will be matched with this class map
here. This name can be up to 32 characters long.
CoS List
Select and enter the CoS list value that will be matched with this class map here.
This value must be between 0 and 7.
DSCP List
Select and enter the DSCP list value that will be matched with this class map here.
This value must be between 0 and 63.
Tick the IPv4 only option to match IPv4 packets only. If not specified, the match is
for both IPv4 and IPv6 packets.
Precedence List
Select and enter the precedence list value that will be matched with this class map
here. This value must be between 0 and 7.
Tick the IPv4 only option to match IPv4 packets only. If not specified, the match is
for both IPv4 and IPv6 packets. For IPv6 packets, the precedence is most three
significant bits of traffic class of IPv6 header.
Protocol Name
Select the protocol name that will be matched with the class map here. Options to
choose from are ARP, BGP, DHCP, DNS, EGP, FTP, IPv4, IPv6, NetBIOS, NFS,
NTP, OSPF, PPPOE, RIP, RTSP, SSH, Telnet, and TFTP.
VID List
Select and enter the VLAN list value that will be matched with the class map here.
This value must be between 1 and 4094.
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
Loading ...
Loading ...
Loading ...