Loading ...
Loading ...
Loading ...
6
When the target operation is completed, then select <Disconnect>.
● Select <Connection Info> on the <Dir
ect Connection> screen to check the connected mobile device.
● When <Keep Enabled If SSID/Ntwk Key Spcfd> is set to <On>, it is not necessary to perform the operation of
selecting <Connect>.
<Keep Enabled If SSID/Ntwk Key Spcfd>(P. 465)
● While connecting via dir
ect connection, you may not be able to connect to the Internet depending on the
mobile device you are using.
● If a wireless connection from the mobile device is not performed within 5 minutes while the SSID and
network key are displayed, the connection waiting state terminates.
● If the status without data transmission between the mobile device and the machine continues during
communication by direct connection, the communication may end.
● Power saving performance of sleep mode degrades while connecting via direct connection.
● If the machine is used with a wireless LAN, you need to keep the machine connected to the wireless LAN
when using direct connection. When the machine is not connected to a wireless LAN or the connection
process is not complete yet, the direct connection process cannot begin. If the connection between the
machine and the wireless LAN is lost during communication through direct connection, the communication
may end.
● When you nish the desired operation, be sure to terminate the connection between the machine and the
mobile device. If they remain connected, power saving performance of sleep mode degrades.
● If you use the direct connection, do not set the IP address manually on the mobile device. Doing so may
prevent proper communication after using the direct connection.
Linking with Mobile Devices
332
Loading ...
Loading ...
Loading ...