Loading ...
Loading ...
Loading ...
● Mak
e sure to hold the paper drawer with both hands, and pull it out gently. Otherwise, you may damage
the paper drawer by dropping it, if it slides out too easily.
2
Adjust the positions of the paper guides to the paper size you want to use.
● While pr
essing the lock release lever, move the paper guide to align the projection to the appropriate paper
size marking.
3
Load the paper so that the edge of the paper stack is aligned against the paper guide
on the rear side of the paper drawer.
● Load the paper with the print side face do
wn.
● Fan the paper stack well, and tap it on a at surface to align the edges of the paper stack.
Do not exceed the load limit line when loading paper
● Make sure that the paper stack does not exceed the load limit line ( ). Loading too much paper can
cause paper jams.
● When loading paper with a logo, see Loading Preprinted Paper(P. 154) .
4
Insert the paper drawer into the machine.
● When you insert the paper dr
awer with <Notify to Check Paper Settings> set to <On>, a conrmation screen
is displayed.
<Notify to Check Paper Settings>(P. 553)
Basic Operations
145
Loading ...
Loading ...
Loading ...