Loading ...
Loading ...
Loading ...
● The machine cannot scan both sides of originals automatically when the originals ar
e placed on the platen
glass or when the machine is set to Manual Sending.
Select <2-Sided Original> in the <TX/RX Settings> tab Select <Book Type> or <Calendar Type>
<Book Type>
Select for originals whose images on the fr
ont and back sides face the same direction.
<Calendar Type>
Select for originals whose images on the front and back sides face in opposite directions.
6
Select <Start>.
● If the <Conrm Destination> scr
een is displayed, check whether the destination is correct, and then select
<Start Scanning>.
➠ Scanning of the original starts.
● If you want to cancel, select <Cancel>
<Yes>. Canceling Sending Faxes(P. 227)
When placing originals in the feeder in step 1
When scanning is complete, the fax
es are sent. Select <Close> to end the procedure.
When placing originals on the platen glass in step 1
When scanning is complete, follow the procedure below.
1
Select the original size.
● When ther
e is only one page to be scanned, proceed to step 3.
2
Place the next original on the platen glass, and select <Scan Next>.
● Repeat this step until you nish scanning all of the pages.
3
Select <Start Sending>.
➠ The faxes are sent.
Checking the communication status
● Setting
<Display Notif. When Job Is Accepted> to <On> displays a screen prompting conrmation of the
communication status. When you select <Status Monitor>, you can check the sending status.
<Display
Notif. When Job Is Accepted>(P
. 524)
Faxing
225
Loading ...
Loading ...
Loading ...