Loading ...
Loading ...
Loading ...
SL-D1000 Series User's Guide
Before Use
20
Notes on Usage
Notes when Handling the Main Unit
O Do not suddenly change the temperature in the room where the printer is installed.
If the temperature changes suddenly, drops of water (condensation) could occur inside the printer which may
have an adverse effect on operations.
O Use the printer in an environment with a temperature of 10 to 35 °C, and a humidity of 20 to 80%. When the
printer is placed on a system rack, make sure the environment of the rack is within these ranges.
Even when the conditions above are met, you may not be able to print properly if the environmental conditions
are not suitable for the paper. Be sure to use the printer in an environment where the paper's requirements are
met. For more details, see the documentation supplied with the paper.
Also, when operating in dry areas, air conditioned environment, or under direct sunlight, maintain the
appropriate humidity.
O Do not place any containers containing water, such as vases or cups, on the printer. If water enters the printer,
it may break down. Also, do not put any heavy objects on the printer.
O The printer is equipped with several airflow vents. The airflow vents allow air to go in and out of the printer. Do
not block these airflow vents by placing any objects near them, or by covering them with film sheets or paper.
O Do not use accessories designed for this printer with any other products.
O If the printer's covers are opened during printing, a safety mechanism is activated and printing is stopped
automatically. Do not turn off the printer in this condition. This could cause the print head nozzles to dry and
print quality to decline.
O Depending on the performance of the computer being used, the printer stops printing temporarily; however,
this is not a malfunction.
O If the printer is not used for an extended period of time, make sure you leave the ink supply units and
maintenance box installed.
O Do not leave the printer for more than three days in a state in which the power was not turned off correctly, such
as due to a power outage. Roll paper may curl which could cause a decline in printer performance.
Notes on Paper
Note the following points when handling and storing the paper. If the paper is not in good condition, print quality
may decline.
Check the documentation supplied with each paper.
Notes on Handling
Use paper recommended by our company.
Loading ...
Loading ...
Loading ...