Loading ...
Loading ...
Loading ...
SL-D1000 Series User's Guide
Problem Solver
138
Problem Solver
When a Message Is Displayed
Messages Displayed on the Printer
If one of the following messages is displayed, read and follow the instructions below.
Message What to do
There may be foreign material inside the
printer. Check and remove it.
Some protective tape or protective materials may have been left inside the
printer. Remove all the protective tape and protective materials, and then turn
the power on again.
Paper that is not a standard size has been
loaded. Reload or replace it.
O A size of roll paper that the printer cannot use may have been loaded.
Correctly load a supported standard size of roll paper.
U
“How to Replace Roll Paper” on page 30
U “Supported Media” on page 163
O The ends of the roll paper could have become uneven. Even up the ends of
the roll paper, and then reload it onto the spindle unit. Or, use a new roll of
paper.
U
“Notes when Loading Roll Paper” on page 29
U “How to Replace Roll Paper” on page 30
Print head may require maintenance.
Perform a Print Head Nozzle Check.
Nozzles may be clogged because the print head unit was stopped for a long
period outside the specified position. We recommend doing a nozzle check to
check for clogged nozzles, and then to clean the heads if necessary.
U
“Print Head Nozzle Check and Cleaning” on page 78
Printing may have been done while the
nozzles were clogged. Check the print
results.
The print head’s auto nozzle check function detected clogged nozzles.
Check the print results and clean the print head if needed, and then start printing
again.
U
“Print Head Nozzle Check and Cleaning” on page 78
Parts are nearing the end of their service
life.
XXXXXXX
The part number appears in XXXXXXXXXX.
A part used in the printer is nearing its replacement time. The printer can be used
until the replacement notice appears, but you will need to request repairs to do
the replacement.
It is time to replace a printer part.
XXXXXXX
The part number appears in XXXXXXXXXX.
It is time to replace a part in the printer.
Contact your dealer or Epson Support. Be sure to tell them the part number
when you contact them.
Loading ...
Loading ...
Loading ...