Loading ...
Loading ...
Loading ...
SL-D1000 Series User's Guide
Wireless LAN Connection
134
O WPA2/WPA3-Enterprise
*: WPA PSK is also known as WPA Personal. WPA2
PSK is also known as WPA2 Personal.
E-6
Solutions:
O Check if MAC address filtering is disabled. If it is
enabled, register the printer's MAC address so that
it is not filtered. See the documentation provided
with the wireless router for details. You can check
the printer's MAC address from the Network
Status part on the network connection report.
O If your wireless router is using shared
authentication with WEP security, make sure the
authentication key and index are correct.
O If the number of connectable devices on the
wireless router is less than the number of network
devices that you want to connect, make settings on
the wireless router to increase the number of
connectable devices. See the documentation
provided with the wireless router to make settings.
Related information
U
“Connecting to a Computer” on page 126
E-8
Solutions:
O Enable DHCP on the wireless router if the printer’s
Obtain IP Address setting is set to Auto.
O If the printer’s Obtain IP Address setting is set to
Manual, the IP address you manually set is invalid
due to out of range (for example: 0.0.0.0). Set a
valid IP address from the printer’s control panel or
by using Web Config.
E-9
Solutions:
Check the following.
O Devices are turned on.
O You can access the Internet and other computers
or network devices on the same network from the
devices you want to connect to the printer.
If still does not connect your printer and network
devices after confirming the above, turn off the wireless
router. Wait for about 10 seconds, and then turn it on.
Then reset your network settings by downloading and
running the installer from the Epson support website
for your product.
Related information
U
“Connecting to a Computer” on page 126
E-10
Solutions:
Check the following.
O Other devices on the network are turned on.
O Network addresses (IP address, subnet mask, and
default gateway) are correct if you have set the
printer’s Obtain IP Address to Manual.
Reset the network address if they are incorrect. You
can check the IP address, subnet mask, and default
gateway from the Network Status part on the network
connection report.
If DHCP is enabled, change the printer’s Obtain IP
Address setting to Auto. If you want to set the IP
address manually, check the printer’s IP address from
the Network Status part on the network connection
report, and then select Manual on the network settings
screen. Set the subnet mask to [255.255.255.0].
If still does not connect your printer and network
devices, turn off the wireless router. Wait for about 10
seconds, and then turn it on.
E-11
Solutions:
Check the following.
O The default gateway address is correct if you set the
printer’s TCP/IP Setup setting to Manual.
O The device that is set as the default gateway is
turned on.
Loading ...
Loading ...
Loading ...