Loading ...
Loading ...
Loading ...
SL-D1000 Series User's Guide
Using the Maintenance Tool (Mac)
107
If you selected something other than Rear
Paper Feed Slot for Paper Source, then go to
step 5.
4
In Paper Type, select the type of paper that is
loaded in the rear paper feed slot.
5
Click Print.
Adjustment patterns are printed.
6
Check the printed adjustment pattern.
Two groups of adjustment patterns, #1 and #2,
are printed. Confirm which of the print pattern
numbers has no gaps between the nozzles in
each group.
7
Select the number of the print pattern you
confirmed, and then click Set.
Select the number of the print pattern you
confirmed individually for both #1 and #2.
The adjustment values are applied.
If you are going to do Paper Feed Adjustment, then go
to step 4 in “Paper Feed Adjustment Method”.
U “Paper Feed Adjustment Method” on page 107
Paper Feed Adjustment Method
Execute this when streaks and unevenness that occur in
print results are not improved even though print head
cleaning was executed.
1
Load paper to print an adjustment pattern.
U
“Basic Operations” on page 29
2
Click Print Head Alignment on the main
screen.
The Print Head Alignment screen is displayed.
3
Click Skip.
If you do not click Skip to do this from Print
Head Alignment, see the following.
U
“Print Head Alignment Method” on page
106
Loading ...
Loading ...
Loading ...