Loading ...
Loading ...
Loading ...
91
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Recording Movies at Specic
Shutter Speeds and Aperture
Values
Still Images
Movies
Set your preferred shutter speed, aperture value, and ISO speed. For
details on available shutter speeds, see “Shutter” (=
211). Available
aperture values vary by lens.
1
Enter [ ] mode.
● Set the mode dial to [ ].
● Press the [
] button, choose [ ] in the
menu, and then choose [ ] (=
32).
2
Congure the settings.
● Turn the [ ] dial to set the shutter
speed.
● Turn the [
] dial to set the aperture
value.
● Press the [
] button and turn the [ ] dial
to set the ISO speed.
● Some shutter speeds may cause ickering on the screen when
recording under uorescent or LED lighting, which may be
recorded.
● Large aperture values may delay or prevent accurate focusing.
Adjusting the Flash Output
Still Images
Movies
Choose from the three ash levels in [ ][ ][ ] modes.
1
Set the ash mode to [Manual ash].
● Press the [ ] button and choose
[Flash Control] on the [ 5] tab. In
[Built-in ash settings], set [Flash Mode]
to [Manual ash] (=
33).
2
Congure the setting.
● Raise the ash, press the [ ] button and
immediately turn the [ ] dial to choose
the ash level, and then press the [ ]
button.
● Once the setting is complete, the ash
output level is displayed.
[
]: Minimum, [ ]: Medium, [ ]:
Maximum
● You can also set the ash level by accessing MENU (=
33)
and choosing [
5] tab > [Flash Control] > [Built-in ash settings]
> [
ash output].
● You can also access the [Flash Control] screen (=
33) as
follows.
- Press and hold the [
] button for at least one second.
- When the ash is up, press the [
] button and immediately
press the [
] button.
● You can also access the [Flash Control] screen (=
33) by
pressing the [
] button and touching [ ].
Loading ...
Loading ...
Loading ...