Loading ...
Loading ...
Loading ...
40
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Movies
● The camera may become warm when recording movies
repeatedly over an extended period. This does not indicate
damage.
● Keep your ngers away from the microphone (1) while recording
movies. Blocking the microphone may prevent audio from being
recorded or may cause the recording to sound mufed.
● Avoid touching camera controls other than the movie button and
touch-screen panel when recording movies, because sounds
made by the camera will be recorded. To adjust settings or
perform other operations during recording, use the touch-screen
panel if possible.
● Mechanical sounds from the lens and camera are also recorded.
These sounds may be less noticeable if you use an optional
external microphone (=
173).
● Once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of signicant
camera shake. To shoot subjects at the same size shown before
shooting, adjust the image stabilization setting (=
84).
(
1
)
Still Images
● If the camera cannot focus on subjects when you press the
shutter button halfway, an orange AF frame is displayed with [
],
and no picture is taken if you press the shutter button all the way
down.
● Focusing may take longer or be incorrect when no people or other
subjects are detected, when subjects are dark or lack contrast, or
in very bright conditions.
● A blinking [
] icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
● If your shots are dark despite the ash ring, move closer to the
subject. For details on the ash range, see “Flash” (=
212).
● To reduce red-eye and to assist in focusing, the lamp may be lit
when shooting in low-light conditions.
● Vignetting or dark image areas may occur with some lenses if the
ash res.
● A blinking [
] icon displayed when you attempt to shoot
indicates that shooting is not possible until the ash has nished
recharging. Shooting can resume as soon as the ash is ready,
so either press the shutter button all the way down and wait, or
release it and press it again.
● Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
● Vignetting appears in previews immediately after your shots,
before the nal, saved images are displayed.
● You can change how long images are displayed after shots
(=
50).
Loading ...
Loading ...
Loading ...