Loading ...
Loading ...
Loading ...
83
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Resetting Flash Settings
Still Images
Movies
Reset [Built-in ash settings] to the default values.
● Press the [
] button, choose [Flash
Control] on the [ 5] tab, and then
choose [Clear settings].
● Choose [Clear built-in ash set.], press
the [
] button, choose [OK] on the next
screen (either press the [ ][ ] buttons or
turn the [ ] dial), and then press the [ ]
button.
Changing the Flash Timing
Still Images
Movies
Change the timing of the ash and shutter release as follows.
● Press the [
] button, choose [Flash
Control] on the [ 5] tab, and then
choose [Built-in ash settings].
● Choose [Shutter Sync.], and then choose
the desired option (=
33).
1st curtain The ash res immediately after the shutter opens.
2nd curtain The ash res immediately before the shutter closes.
● [1st curtain] is used whenever the shutter speed is 1/100 or faster,
even if you select [2nd curtain].
Changing the Flash Metering Mode
Still Images
Movies
[Evaluative] ash metering, which enables standard ash exposure, can
be changed to average ash metering across the metering area, as when
using an externally metered ash.
● Press the [
] button and choose
[Flash Control] on the [ 5] tab. Choose
[E-TTL II meter.] and then [Average].
● When using [Average], adjust ash exposure compensation to
suit the shooting conditions.
Loading ...
Loading ...
Loading ...