Loading ...
Loading ...
Loading ...
186
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
● Use the camera to format the memory card, or switch to a card that supports
high-speed recording. Note that even if the elapsed time display is incorrect, the
length of movies on the memory card corresponds to the actual recording time.
[ ] is displayed and shooting stops automatically.
● The camera’s internal memory buffer lled up as the camera could not record to
the memory card quickly enough. Try one of the following measures.
- Use the camera to perform low-level formatting of the memory card (=
153).
- Lower the image quality (=
48).
- Switch to a memory card that supports high-speed recording.
Subjects look distorted.
● Subjects that pass in front of the camera quickly may look distorted. This is not a
malfunction.
The movie has still moments.
● With some lenses, movies may seem to be missing frames at moments when the
brightness changes signicantly.
Playback
Playback is not possible.
● Image or movie playback may not be possible if a computer is used to rename
les or alter the folder structure.
Playback stops, or audio skips.
● Switch to a memory card that you have performed low-level formatting on with the
camera (=
153).
● There may be brief interruptions when playing movies copied to memory cards
that have slow read speeds.
● When movies are played on a computer, frames may be dropped and audio may
skip if computer performance is inadequate.
Sound is not played during movies.
● Adjust the volume (=
100) if the sound in the movie is faint.
● No sound is played for movies shot in [
] (=
60) or [ ] (=
64) mode
because audio is not recorded in these modes.
Shots are affected by linear noise or moiré.
● Some subjects make shots more susceptible to linear noise or moiré. This is more
likely to happen under the following conditions.
- Subjects have ne horizontal stripes or checkered patterns.
- The sun, lights, or other sources of bright light are visible on the shooting
screen, or are nearby.
In this case, taking the following steps may reduce noise or moiré.
- Resize the subject by changing the focusing distance or zooming in or out.
- Recompose the shot to keep sources of bright light off the shooting screen.
- Attach a lens hood to prevent bright light from shining into the lens.
● Images may also be affected by linear noise or moiré if you shift or tilt a TS-E
lens.
Subjects are affected by red-eye.
● Set [Red-eye reduc.] to [On] (=
50). The red-eye reduction lamp (=
4)
will light up for ash shots. For best results, have subjects look at the red-eye
reduction lamp. Also try increasing the lighting in indoor scenes and shooting at
closer range.
● Edit images using red-eye correction (=
118).
Recording to the memory card takes too long, or continuous shooting is
slower.
● Use the camera to perform low-level formatting of the memory card (=
153).
Continuous shooting suddenly stops.
● Continuous shooting stops automatically to protect the camera after about 1,000
shots are taken at one time. Release the shutter button a moment before you
resume shooting.
Shooting settings or Quick Set menu settings are not available.
● Available setting items vary by shooting mode. Refer to “Functions Available in
Each Shooting Mode”, “Quick Set Menu”, “Shooting Tab”, “C.Fn Tab”, “INFO.
Quick Control”, and “Set Up Tab” (=
193 – =
207).
Touch AF or Touch Shutter does not work.
● Touch AF or Touch Shutter will not work if you touch the edges of the screen.
Touch closer to the center of the screen.
Loading ...
Loading ...
Loading ...