Loading ...
Loading ...
Loading ...
154
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
● Choose [Electronic level] on the [
1] tab,
and then press the [ ] button.
● Choose [Reset], and then press the [
]
button.
● Choose [OK], and then press the [
]
button.
Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
1
Congure the setting.
● Choose [Eco Mode] on the [ 2] tab, and
then choose [On].
● [
] is now shown on the shooting
screen (=
190).
● The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2
Shoot.
● To activate the screen and prepare for
shooting when the screen is off, press the
shutter button halfway.
Changing the Video System
Set the video system of any television used for display. This setting
determines the image quality (frame rate) available for movies.
● Choose [Video system] on the [
1] tab,
and then choose an option.
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
For greater calibration accuracy, display grid lines (=
92) to help you
level the camera in advance.
1
Make sure the camera is level.
● Place the camera on a at surface, such
as a table.
2
Calibrate the electronic level.
● Choose [Electronic level] on the [ 1] tab,
and then press the [ ] button.
● To adjust left/right tilt, choose [Horizontal
Roll Calibration], and to adjust forward/
backward tilt, choose [Vertical Pitch
Calibration], followed by the [
] button. A
conrmation message is displayed.
● Choose [OK], and then press the [
]
button.
Loading ...
Loading ...
Loading ...