Loading ...
Loading ...
Loading ...
Variable loading floor in the luggage compartment (Estate)
Set in the upper / lower position
Fig. 112
Set the variable loading floor to the upper/lower position
The variable loading floor can be set to the upper or lower position as follows.
›
Raise the variable loading floor by the handle
A
in direction of arrow
1
and
move partially in the direction of arrow
2
» Fig. 112.
›
To
set in the upper position, lift the variable loading floor in the front area
and position on the edge
C
.
›
To set in the lower position, move the variable loading floor in the direction
of arrow
2
until it removes itself from the mounts
B
, and position the front
of the variable loading floor on the floor covering of the luggage compart-
ment.
›
Insert the variable loading floor in direction of arrow
3
until it stops (when
set in the lower position, the front region
D
must be raised) and position in
the direction of arrow
4
.
The area under the variable loading floor can be used to stow small objects.
The maximum permissible load of the variable loading floor in the upper posi-
tion is 75 kg. For the transport of heavy loads, adjust the variable loading floor
in the lower position.
Note
The variable loading floor cannot be set in the upper/lower position when the
luggage compartment cover is in the “parking position” » page 84.
Removing/inserting
Fig. 113
Remove variable loading floor
Removing
›
Lift the variable loading floor at handle
A
in the direction of arrow
1
until
its rear area is about 15 cm
B
below the edge of the cover» Fig. 113.
›
Remove the variable loading floor from the vehicle by moving it in the direc-
tion of arrow
2
.
Inserting
›
Grasp the variable loading floor at handle
A
» Fig. 113.
›
Insert the variable loading floor, titled with the front area about 15 cm
B
beneath the edge of the cover, in the vehicle.
›
Then follow the same steps as when setting the upper position or the lower
position » page 86.
CAUTION
When removing or inserting the variable loading floor, a distance of 15 cm
B
» Fig. 113 underneath the edge of the cover must be maintained - risk of dam-
aging the luggage compartment seal.
Note
The variable loading floor cannot be placed in the vehicle when the luggage
compartment cover is in the “park position” » page 84.
86
Using the system
Loading ...
Loading ...
Loading ...