Loading ...
Loading ...
Loading ...
Automatic driving light control
Fig. 55
Light switch: position
The light switch is in position » Fig. 55 then depending on the equipment
the automatic switch on / off the lights corresponding to the light or weather
conditions (rain) takes place.
If the light switch is in position
, the lettering
illuminates next to the
light switch. If the light is switched on automatically, the symbol
also illumi-
nates next to the light switch.
Automatic driving light control in the rain (referred to as function in the
following)
The low beam lights are switched on automatically if the following conditions
are met.
The function is activated.
The light switch is in the position
.
The windscreen wipers are on for more than 15 s.
The light turns off automatically about 4 minutes after turning off the wipers.
Setting, activation/deactivation
The following functions can be activated/deactivated in the Infotainment
menu
→ →
Light
.
▶
Sensitivity adjustment of the sensor for determining the lighting conditions
for automatic driving light control
▶
Automatic driving light control during rain
WARNING
The automatic driving lamp control (position ) only acts as a support
and does not release the driver from his responsibility to check the light
and, if necessary, to switch on the lights depending on the prevailing light
conditions.
CAUTION
Poorer visibility is detected by a sensor mounted below the windscreen in the
holder of the inside mirror or in the control panel. Do not cover the sensor -
the system function can be disrupted.
Headlight assist (Light Assist)
Fig. 56
Installation location of the sensor / system on/off
The system automatically switches the high beam on/off in accordance with
the existing traffic (other vehicles) and environmental conditions (e.g. driving
through a lit village).
The main beam on/off is controlled by a sensor or » Fig. 56.
Activating / Deactivating the system takes place in the Infotainment menu
→
→
Light
→
Light Assist
.
Conditions for the system function
The system is activated.
The light switch is in the position
.
The vehicle speed is over 60 km/h or for some countries over 40 km/h.
The windscreen is clean in the sensor area.
Switch on the system
›
Push the lever into the sprung position
A
» Fig. 56 The following indicator
light
lights up in the instrument cluster display.
Switch off the system
›
If the high beam is switched on automatically, move the lever into the sprung
position
B
. The warning light goes out. The high beam turns off.
62
Using the system
Loading ...
Loading ...
Loading ...