User Manual - Page 214

For 2018 RAPID SPACEBACK.

Loading ...
Loading ...
Loading ...
Install trim
Press the wheel trim onto the wheel rim at the designated valve opening.
Then press the trim into the wheel rim until its entire circumference locks
correctly in place.
The position of the anti-theft wheel bolt is indicated by means of a symbol on
the back of the wheel trim supplied ex-factory or from the ŠKODA Original
Accessories. If using the anti-theft wheel bolt it should be fitted at this point
» .
WARNING
We recommend that you use wheel trims from ŠKODA Original Accesso-
ries. A sufficient air supply may not be able to be guaranteed with other
wheel trims to cool the braking system – Otherwise there is a risk of an ac-
cident.
CAUTION
If the wheel trim is positioned outside the position marked for the anti-theft
wheel bolt, there is a risk of damaging the wheel cover.
Use only manual pressure and do not hit the full wheel trim – otherwise there
is a risk of damaging the trim.
Note
We recommend that you use wheel trims from ŠKODA Original Accessories.
Wheel bolts
Fig. 245
Remove the cap
To remove the cap insert the extraction pliers as far as they will go on the
cap and pulling them out in the direction of arrow » Fig. 245.
To install, insert the cap onto the wheel bolt as far as it will go.
Anti-theft wheel bolts
Fig. 246
Anti-theft wheel bolt and at-
tachment
The anti-theft wheel bolts protect the wheels from theft. This can only be
loosened/tightened with attachment
B
» Fig. 246.
Insert the upper section
B
on the anti-theft wheel bolt
A
until it stops.
Insert the key as far as it will go onto attachment
B
and loosen / tighten the
wheel bolt.
Remove the attachment.
The attachment for the anti-theft wheel bolts must always be kept in the
vehicle in case of a possible wheel change!
For wheel trims supplied ex-factory or from ŠKODA Original Accessories, the
anti-theft wheel bolt should be installed in the position marked on the back of
the wheel trim.
Note
We recommend that you retain the label with the code number. A replacement
upper section can be acquired from ŠKODA Original Parts based on this.
Loosening/tightening wheel bolts
Fig. 247
Loosening the wheel bolts
212
Do-it-yourself
Loading ...
Loading ...
Loading ...