Loading ...
Loading ...
Loading ...
WARNING (Continued)
■
Bulbs H7 H8 and H15 are pressurised and may burst when changing the
bulb - risk of injury! We therefore recommended wearing gloves and safety
glasses when changing a bulb.
■
Do not carry out any work on the Xenon gas discharge lamps - risk of
death!
CAUTION
■
Do not take hold of the glass bulb with naked fingers (even the smallest
amount of dirt reduces the working life of the light bulb). Use a clean cloth,
napkin, or similar.
■
The cap of the filament bulb must always be seated correctly in the head-
light, otherwise this may allow water and debris to enter the headlight - risk of
damage to the headlights.
Note
We recommend that a box of replacement bulbs always be carried in the vehi-
cle.
Bulb arrangement in the halogen headlights
Fig. 270
Left headlight: Halogen headlight / halogen headlight with LED
daytime running lights
Read and observe and on page 225 first.
Bulb arrangement » Fig. 270
Low beam
Main beam, separate daytime running lights, and parking light
A
B
Flashing
Main beam
Replace bulb for main beam, daytime running lights and parking
light (halogen headlight)
Fig. 271
Replacing the bulb for main
beam and separate daytime run-
ning lights
Fig. 272
Change the light bulb for the parking light
Read and observe and on page 225 first.
Replacing the bulb for main beam and separate daytime running lights
›
Remove the protective cap
B
» Fig. 270 on page 226.
›
Turn the holder with the bulb in the direction of the arrow
1
» Fig. 271.
›
Remove the holder with the bulb in the direction of arrow
2
.
›
Replace the bulb in the holder.
›
Insert the holder with the new bulb into the headlight in the opposite direc-
tion to the arrow
2
.
›
Turn the holder with the new bulb in the opposite direction to the arrow
1
until it stops.
›
Fit the protective cap
B
» Fig. 270 on page 226.
C
D
226
Do-it-yourself
Loading ...
Loading ...
Loading ...