Loading ...
Loading ...
Loading ...
Note
The national copyright laws that apply in your country must be observed.
SD card
Fig. 141
Amundsen: insert the SD card
Fig. 142
Swing / Blues: insert SD card
Inserting
›
Insert the SD card in the slot in the direction of arrow (with the cut end fac-
ing right), until it “locks into place” » Fig. 141 or » Fig. 142.
Removing
›
Before removing the SD card, go to the main Media menu and tap function
surface → Tap on
Remove safely
.
›
Push down on the inserted SD memory card. The SD card “jumps” into the
eject position.
CAUTION
■
Do not use an SD card with a broken write protection “slide” - there is a risk
of damage to the SD card reader!
■
When using an SD card with an adapter, vehicle vibrations might cause the
card to fall out of the adapter.
USB input
Installation location of the USB input and information regarding its use
» page 74.
At the USB input, an audio source can be connected directly or via a connect-
ing cable.
›
To connect, insert the USB audio source into the appropriate input.
›
To disconnect the USB, go to the main Media menu and tap on the function
surface
→ Tap on
Remove safely
.
›
Disconnect the audio source from the corresponding USB input.
Charging a USB audio source
With the ignition, the charging process starts automatically after the USB au-
dio source is connected (applies to audio sources where charging via the USB
connector is possible).
The charging efficiency can differ compared to charging from the usual mains
power supply.
Depending on the type of the connected external device and the frequency of
use, the charging current may not be sufficient to charge the battery of the
connected device.
Some connected audio sources may not recognise that they are being charg-
ed.
CAUTION
USB extension cables or reducers may impair the function of the connected
audio source.
Note
We recommend that you use extension cables from ŠKODA Original Accesso-
ries.
120
Infotainment
Loading ...
Loading ...
Loading ...