Loading ...
Loading ...
Loading ...
›
If the high beam is is not switched on automatically, move the lever into the
sprung position
A
. The warning light goes out. The high beam turns on.
The high beam switches off automatically when the speed falls below 30 km/h
(but the system remains switched on).
If there is a system fault, an error message will appear in the instrument clus-
ter display. Seek help from a specialist garage.
WARNING
The system is used only for support, thus the driver is not released from his
obligation to manually adjust the main or low beam according to the given
ambient conditions (e.g. in unfavourable lighting and weather conditions, as
when passing poorly lit road users, if necessary, when the area in front of
the sensor is covered by an obstacle).
CAUTION
Do not cover the sensor and keep the front screen clean - system functionality
can be impaired.
Fog lights/rear fog light
Fig. 57
Light switch – switch on front
and rear fog lights
Switching on the fog lights / rear fog lights is possible if the following con-
ditions apply.
The lights switch is in position, or » Fig. 57.
›
To switch on the fog lights, pull the light switch in position
1
; the warning
light
illuminates in the instrument cluster.
›
To switch on the rear fog light, pull the light switch to position
2
, the indi-
cator light will light up in the instrument cluster.
If the vehicle is not fitted with fog lights, the rear fog light is switched on by
pulling out the light switch to the only possible setting.
The fog lights/rear fog light are switched off in the reverse order.
Note
If an accessory is connected to the trailer socket, the rear fog lamp does not
light up on the vehicle.
Fog lights with CORNER function
The CORNER function automatically switches on the fog lights on the respec-
tive side of the vehicle (e.g. when cornering or steering), if the following condi-
tions are fulfilled.
The turn signal is turned on or the front wheels are severely locked (in the
event of conflict between the two versions, has turn signal has the higher
priority).
The vehicle speed is below 40 km/h.
The low beam is switched on.
The fog lights are not switched on.
The two fog lights are switched on when you shift into the reverse gear.
COMING HOME / LEAVING HOME
The function COMING HOME ensures that the vehicle's environment is illumi-
nated after switching off the ignition and opening the driver's door.
The function LEAVING HOME ensures that the vehicle's environment is illumi-
nated after unlocking the vehicle with the radio remote control unit.
The function switches the light on only if there is poorer visibility and the light
switch is in the position .
The two functions can be activated/deactivated and adjusted in the Infotain-
ment menu
→ →
Light
.
CAUTION
■
Poorer visibility is detected by a sensor mounted below the windscreen in
the holder of the inside mirror or in the control panel. Do not cover the sensor
- the system function can be disrupted.
■
If this option is always enabled, then the battery is heavily loaded.
63
Lights and visibility
Loading ...
Loading ...
Loading ...