Loading ...
Loading ...
Loading ...
Multifunction pocket
Fig. 104
Securing the multifunction
pocket
Read and observe and on page 81 first.
The pocket » Fig. 104 can be secured to the fastening elements
A
,
B
and
C
» Fig. 101 on page 82.
The maximum permissible load for the pocket attached to the fastening ele-
ment is 3 kg.
CAUTION
In vehicles with a variable loading floor, it is not possible to secure the pocket
to the fastening elements.
Hooks
Fig. 105
Hooks
Read and observe and on page 81 first.
A hook for attaching small items of luggage, such as bags etc., is provided on
each side of the luggage compartment» Fig. 105.
The maximum permissible load of the hook is 7.5 kg.
Floor covering on both sides
Read and observe and on page 81 first.
You can fit a double-sided floor covering in the luggage compartment. One
side is made of fabric, the other side is washable (suitable for transporting wet
or dirty items).
Luggage compartment cover
Fig. 106
Remove the luggage compartment cover
Read and observe and on page 81 first.
If the support straps
A
» Fig. 106 are attached to the boot lid, then opening
the lid will raise the boot lid cover (hereafter referred to as cover).
The cover may be removed from the vehicle or stored behind the rear seat
backs in the “park position” » Fig. 107 on page 84.
The maximum permissible load of the cover is 1 kg.
Removing
›
On both sides of the boot lid, unhook the straps
A
in the direction of arrow
1
» Fig. 106.
›
Hold the raised cover and press on the two sides on the underside of the
cover in the area of the recess
C
.
›
Remove the cover in the direction of the arrow
2
.
Installing
›
Place the fixtures
B
on the cover above the brackets
C
on the side trim
» Fig. 106.
83
Transport of cargo
Loading ...
Loading ...
Loading ...