Loading ...
Loading ...
Loading ...
Removing/installing taillights
Fig. 277
Remove light / pull out connector
Read and observe and on page 225 first.
Removing
›
Open the boot lid.
›
Insert the clamps for removing the full wheel trims into opening
A
» Fig. 277.
›
Remove the cover by pulling the hook in the direction of arrow
1
.
›
Unscrew the screws
B
with the key from the tool kit.
›
Grasp the lamp and carefully remove in the direction of arrow
2
.
›
Press the latch
C
on the holder in the direction of the arrow
3
.
›
Press the safety lug in the direction of arrow
4
and pull out the holder in the
direction of arrow
5
.
Fitting
›
Insert the connector into the light and lock it securely.
›
Tighten the lock in the opposite direction to the arrow
3
.
›
Insert the lamp with pins
D
» Fig. 277 into the recesses
E
in the body.
›
Carefully push the cover in » .
›
Screw the tail lamp into place and install the cover. The cover must engage
securely.
›
Close the boot lid.
CAUTION
■
Ensure that the cable bundle does not become pinched between the body
and the lamp when it is being refitted – risk of damage to the electrical instal-
lation and risk of water ingress.
■
If you are not sure whether the cable bundle has become pinched, we rec-
ommend that you have the light connection checked by a specialist garage.
■
Ensure that the vehicle paintwork and the tail lamp are not damaged when
removing and installing the tail lamp.
Replacing the bulbs in the taillight assembly
Fig. 278
Outer part of the lamp / removing the bulb / lamp holder
Read and observe and on page 225 first.
Outer part of the lamp
›
Turn the holder with the bulb
A
in the direction of arrow
1
» Fig. 278.
›
Remove the socket with the bulb from the lamp housing in the direction of
arrow
2
.
›
Change the bulb.
›
Reinsert the holder with the bulb into the lamp housing and turn in the oppo-
site direction of the arrow
1
to the stop.
Inner parts of the lamp
›
Unlock the bulb holder at the areas marked with arrows » Fig. 278 and re-
move the bulb holder from the light.
›
Turn the respective light bulb counter-clockwise to the stop and remove it
from the bulb holder.
229
Fuses and light bulbs
Loading ...
Loading ...
Loading ...