Loading ...
Loading ...
Loading ...
Storing the tyre pressure values by means of the button
Fig. 216
Key for storing the pressure val-
ues
Read and observe and on page 182 first.
›
Inflate all the tyres to the specified pressure.
›
Switch on the ignition.
›
Press the symbol key
» Fig. 216 on the button and hold.
The warning light
in the instrument cluster illuminates.
An acoustic signal sounds and the warning light goes out, indicating that the
tyre pressure values have been stored.
›
Release the symbol key
.
Towing device and trailer
Hitch
Introduction
The maximum trailer load is dependent on the engine and the vehicle equip-
ment. The valid specification for your vehicle can be found in the technical ve-
hicle documentation, the declaration of conformity (the so-called COC docu-
ment) or at a ŠKODA partner.
Other information (e.g. on the nameplate of the trailer device) provide only
about the test values of the device information.
WARNING
■
Check that the tow bar is seated correctly and is secured in the mounting
recess before the start of every journey.
■
When the ball rod is not used and properly secured in the receiving shaft,
this could be damaged or incomplete and must not be used - risk of acci-
dent.
■
Do not modify or adapt the towing device in any way.
■
Keep the mounting recess of the towing equipment clean at all times.
Such dirt prevents the ball head from being attached securely.
183
Towing device and trailer
Loading ...
Loading ...
Loading ...