Loading ...
Loading ...
Loading ...
Steps
1.
Click Access Control → Advanced Funcon → Cross-Controller An-passing Back to enter the
cross-controller an-passing back conguraon page.
2.
Check Enable Cross-Controller An-passing Back to enable the funcon.
3.
Select Based on Network as the an-passing back mode.
4.
Select Route An-passing Back as the rule.
5.
Select a server in the drop-down list for judging the an-passing back.
Note
●
You can click Delete Card Swiping Record and select the card in the pop-up window to delete
the card swiping informaon in all devices.
●
Up to 5000 cards' swiping records can be stored in the selected server.
6.
Click Select Access Controller to select a device for an-passing back.
Note
Up to 64 devices with an-passing back funcon can be added.
7.
Set the rst card reader and aer card readers.
1) In the Card Reader area, click the icon on the le of the card reader column to set it as the
rst card reader.
Figure 8-5 Select First Card
The icon will turn to .
2) Click the card reader aerward input eld to select the card readers aerward in the pop-up
window.
Note
●
Up to 16 card readers aerward can be added for each card reader.
●
The displayed card readers in the card reader aerward input eld should be in
authencaon order.
3) Check the checkbox in the Enable An-passing Back column to enable the an-passing back
funcon.
8.
Click Save.
Access Controller User Manual
87
Loading ...
Loading ...
Loading ...