Loading ...
Loading ...
Loading ...
4.
Start geng the person informaon.
-
Select the device and then click OK to start geng the person informaon from the device.
-
Double click the device name to start geng the person informaon.
The person informaon, including person details, person's ngerprint informaon (if
congured), and the linked card (if congured), will be imported to the selected organizaon.
Issue Cards to Person in Batch
You can issue mulple cards to one person in batch.
Perform this task when you need to issue mulple cards to one person.
Steps
1.
Enter Access Control → Person and Card .
2.
Click Issue Card in Batch.
All the added person with no card issued will display in the Person(s) with No Card Issued list.
3.
Set the parameters for the cards.
1) Select the card type according to actual needs.
Note
For details about the card type, refer to Issue a General Card to Person..
2) In the Card Password eld, create a password (4 to 8 digits) for the card itself.
Note
The password will be required when the card holder swiping the card to enter or exit the door
if the card reader authencaon mode requires password. For details, refer to Congure Card
Reader Authencaon Mode and Schedule.
3) Input the card quanty issued for each person.
Example
If the card quanty is 3, you can read or enter three card numbers for each person.
4) Set the eecve me and expiry me of the card.
4.
In the Person(s) with No Card Issued list on the le, select the person to issue cards.
5.
Select the reading card mode and input the card number.
Access Controller Reader
Place the card on the reader of the Access Controller and click Read to get the card No.
Card Enrollment Staon
Place the card on the Card Enrollment Staon and click Readto get the card No.
Access Controller User Manual
66
Loading ...
Loading ...
Loading ...