Loading ...
Loading ...
Loading ...
You can view the default card reader authencaon mode in this part.
5.
Click Save.
6.
Oponal: Click Copy to and select the card reader(s) to copy the parameters to other card
readers.
Congure Alarm Input Parameters
Aer adding the access control device, you can congure the parameters for its alarm inputs.
Perform this task if you need to set the alarm input parameters of the access control device.
Steps
Note
If the alarm input is armed, you cannot edit its parameters. Disarm it rst.
1.
Click Access Control → Advanced Funcon → Access Control Parameters to enter Parameter
Sengs page.
2.
Select a device and click to show the alarm inputs of the selected access control device.
3.
Set the alarm input parameters.
Nickname
Edit the alarm input name as desired.
Detector Type
The detector type of the alarm input.
Zone Type
Set the zone type for the alarm input.
Sensivity
Only when the duraon of signal detected by the detector reaches the seng me, the alarm
input is triggered. For example, you have set the sensivity as 10ms, only when the duraon
of signal detected by the detector reach 10ms, this alarm input is triggered.
Trigger Alarm Output
Select the alarm output(s) to be triggered.
4.
Click Save.
5.
Oponal: Click the switch on the upper-right corner to arm or disarm the alarm input.
Congure Alarm Output Parameters
Aer adding the access control device, if the device links to alarm outputs, you can congure the
parameters.
Perform this task if you need to set the alarm input parameters of the access control device.
Access Controller User Manual
79
Loading ...
Loading ...
Loading ...