Loading ...
Loading ...
Loading ...
3.
Select Based on Card as the an-passing back mode.
4.
Select Route An-passing Back as the rule.
5.
Set the sector ID.
6.
Click Select Access Controller to select a device for an-passing back.
Note
Up to 64 devices with an-passing back funcon can be added.
7.
Set the rst card reader and aer card readers.
1) In the Card Reader area, click the icon on the le of the card reader column to set it as the
rst card reader.
Figure 8-4 Select First Card
The icon will turn to .
2) Click the card reader aerward input eld to select the card readers aerward in the pop-up
window.
Note
●
Up to 16 card readers aerward can be added for each card reader.
●
The displayed card readers in the card reader aerward input eld should be in
authencaon order.
3) Check the checkbox in the Enable An-passing Back column to enable the an-passing back
funcon.
8.
Click Save.
Congure Route An-passing Back Based on Network
The route an-passing back depends on the card swiping route. You should set the rst card reader
and the card readers aerwards. It will authencate the an-passing back according to the
entrance and exit informaon stored on the card reader.
Perform this task if you need to congure route an-passing back and authence the an-passing
back recsult according to the entrance and exit informaon stored on the card reader.
Access Controller User Manual
86
Loading ...
Loading ...
Loading ...