Loading ...
Loading ...
Loading ...
Steps
1.
Click Access Control → Advanced Funcon → Access Control Parameters to enter Parameter
Sengs page.
2.
Select a device and click to show the alarm outputs of the selected access control device.
3.
Set the alarm output parameters.
Output Delay
The delay me for the alarm output to be triggered.
4.
Click Save.
5.
Oponal: Set the switch on the upper right corner to ON to trigger the alarm output.
Congure Individual Authencaon
Set individual's authencaon mode.
Before You Start
Add person and apply the person to the device. For details, see Manage Person Informaon and
Manage Permission.
Steps
1.
Click Access Control → Advanced Funcon → Card Reader Authencaon to enter the card
reader authencaon conguraon page.
2.
Click a device name to enter the Individual Advanced Authencaon page.
3.
Click Add and select persons and their authencaon mode.
4.
Click OK to save the sengs.
Note
The congured individual authencaon has higher priority than other authencaon modes.
The individual applicaon mode will be applied to the device automacally.
5.
Oponal: Select a person in the Individual Authencaon page, and click Modify to change the
person's individual authencaon mode.
6.
Oponal: If applying individual authencaon mode failed, click Failed Applicaon to view
details. Select an applying status from the list and click Apply Again to apply the person's
authencaon mode again to the device.
Congure Card Reader Authencaon Mode and Schedule
You can set the passing rules for the card reader of the access control device according to your
actual needs.
Perform this task if you need to congure the card reader's authencaon mode and schedule.
Access Controller User Manual
80
Loading ...
Loading ...
Loading ...