Loading ...
Loading ...
Loading ...
Congure Entrance/Exit An-Passback Based on Card
You can set the entrance card reader and the exit card reader only for entering and exing, without
seng the rst card reader and the card readers aerwards. It will judge the an-passing back
according to the entrance and exit records on the card.
Perform this task if you need to congure entrance/exit an-passing back and judge the an-
passing back according to the entrance and exit records on the card.
Steps
Note
It supports M1 card at present and the sector cannot be encrypted. For details about sector
encrypon, refers to Authencate M1 Card Encrypon .
1.
Click Access Control → Advanced Funcon → Cross-Controller An-passing Back to enter the
cross-controller an-passing back conguraon page.
2.
Check Enable Cross-Controller An-passing Back to enable the funcon.
3.
Select Based on Card as the an-passing back mode.
4.
Select Entrance/Exit An-passing Back as the rule.
5.
Set the sector ID.
6.
Click Select Access Controller to select a device for an-passing back.
Note
Up to 64 devices with an-passing back funcon can be added.
7.
In the Card Reader area, check the checkboxes in the Enable An-passing Back column to select
the entrance card reader and the exit card reader.
Note
Up to one entrance carder and one exit card reader should be checked.
8.
Click Save.
Congure Entrance/Exit An-Passback Based on Network
You can set the entrance card reader and the exit card reader only for entering and exing, without
seng the rst card reader and the card readers aerwards. It will authencate the an-passing
back according to the entrance and exit informaon on the card reader.
Perform this task if you need to congure entrance/exit an-passing back and judge the an-
passing back according to the entrance and exit informaon stored on the card reader.
Steps
1.
Click Access Control → Advanced Funcon → Cross-Controller An-passing Back to enter the
cross-controller an-passing back conguraon page.
Access Controller User Manual
88
Loading ...
Loading ...
Loading ...