Loading ...
Loading ...
Loading ...
Note
Currently, the supported ngerprint recorder types include DS-K1F800-F, DS-K1F300-F, DS-
K1F810-F, and DS-K1F820-F.
3) Oponal: For ngerprint recorder type DS-K1F800-F, you can set the serial port number, baud
rate, and overme parameters of the ngerprint recorder.
Note
●
The serial port number should correspond to the serial port number of PC.
●
The baud rate should be set according to the external ngerprint card reader. The default
value is 19200.
●
Timeout aer eld refers to the valid ngerprint collecng me. If the user does not input a
ngerprint or inputs a ngerprint unsuccessfully, the device will indicate that the ngerprint
collecon is over.
4) Click Save.
6.
Collect the ngerprint.
1) Click Start.
2) Select a ngerprint on the hand picture to start collecng.
3) Li and rest the corresponding ngerprint on the ngerprint scanner twice to collect the
ngerprint.
1) Select a ngerprint type.
Note
When the same ngerprints of one person are collected, the prompt with repeat ID appears.
When the similar ngerprints are collected for dierent person, the prompt with repeat ID and
person name appears.
7.
Conrm adding the person.
-
Click OK to add the person and close the Add Person window.
-
Click Save and Connue to add the person and connue to add other persons.
Collect Person's Fingerprint Remotely
When adding person, you can collect the person's ngerprint informaon via the remote access
control device's ngerprint module.
Perform this task when you need to collect the person's ngerprint via the ngerprint module of
the access control device.
Steps
1.
Enter Access Control → Person and Card .
2.
Select an organizaon in the organizaon list to add the person and click Add.
Access Controller User Manual
62
Loading ...
Loading ...
Loading ...