Loading ...
Loading ...
Loading ...
Before You Start
You should add access control device before conguring aendance check point. For details, refer
to Add Device .
Perform the following steps to set the card reader of the access control point as the aendance
check point.
Steps
Note
By default, all card readers of the added access control devices are set as aendance checkpoint.
1.
Enter the Time and Aendance module.
2.
Click Advanced Sengs → Aendance Check Point Sengs to enter the Aendance Check
Point Sengs page.
3.
Oponal: Uncheck Set All Card Readers as Check Points.
Only the card readers in the list will be set as the aendance check points.
4.
Click to enter the Add Aendance Check Point window.
5.
Set the related parameters.
Check Point Name
Customize a name for the check point.
Card Reader
Select the card reader from the drop-down list as the aendance check point.
Check Point Funcon
Select the check point funcon from the drop-down list. You can set the check point as Start/
End-Work check point, Start-Work check point, or End-Work check point.
Door Locaon
Input the door locaon's name.
Check Point Descripon
Input the check point's descripons as desired.
6.
Click Add.
The added aendance check point displays on the list.
7.
Oponal: Aer adding the aendance check point, perform one of the following operaons.
Edit the aendance check point informaon.
Delete the aendance check point in the list.
Congure Holiday
You can add the holiday during which the check-in or check-out will not be recorded.
Access Controller User Manual
119
Loading ...
Loading ...
Loading ...