Hikvision DS-K2601-G User Manual

Loading ...

Congure Custom Wiegand Rule

Based on the knowledge of uploading rule for the third party Wiegand, you can set mulple

customized Wiegand rules to communicate between the device and the third party card readers.

Before You Start

Wire the third party card readers to the device.

Perform this task to congure the custom Wiegand rule for the third party card readers.

Steps

Note

●

By default, the device disables the custom wiegand funcon. If the device enables the custom

Wiegand funcon, all wiegand interfaces in the device will use the customized wiegand protocol.

●

Up to 5 custom Wiegands can be set.

●

For details about the custom Wiegand, see Custom Wiegand Rule Descripons .

Click Access Control → Advanced Funcon → Custom Wiegand to enter the custom Wiegand

conguraon page.

Select a custom Wiegand on the le.

Check Enable to enable the custom Wiegand.

Create a Wiegand name.

Note

Up to 32 characters are allowed in the custom Wiegand name.

Click Select Device to select the access control device for seng the custom wiegand.

Set the parity according to the property of the third party card reader.

Note

●

Up to 80 bits are allowed in the total length.

●

The odd parity start bit, the odd parity length, the even parity start bit and the even parity

length range from 1 to 80 bit.

●

The start bit of the card ID, the manufacturer code, the site code, and the OEM should range

from 1 to 80 bit.

Set output transformaon rule.

1) Click Set Rule to open the Set Output Transformaon Rules window.

Access Controller User Manual

Loading ...

Hikvision DS-K2601-G Pro Series Access Controller