Loading ...
Loading ...
Loading ...
3.
Click Add to open the adding person window.
The Person No. will be generated automacally and is not editable.
4.
Input the basic informaon including person name, valid me duraon, password.
5.
Set person type and privilege.
Normal
You can set privilege for the normal person, including Manage Device Backend and Close
Delay Enabled.
Visitor
If the person is a visitor, you should set the maximum mes for the visitor to open the door.
Aer the congured value, the visitor cannot open the door again.
Blocklist
Add the person in the blocklist. If the person authencates on the device, the device will
upload an event to the client soware.
Manage Device Backend
Set the person as an administrator. Aer the permission is applied to the device, the person
can log in the device and congure parameters on the device.
Close Delay Enabled
If enabled the funcon, the door opening me duraon will be extended. You can set the
Extended Open Duraon in Congure Door Parameters.
6.
Oponal: Set the person's picture.
-
Click Upload Picture to select the person picture from the local PC to upload it to the client.
-
Click Take Photo to take the person's photo with the PC camera.
7.
Conrm adding the person.
-
Click OK to add the person and close the Add Person window.
-
Click Save and Connue to add the person and connue to add other persons .
Congure Detailed Informaon
When adding person, you can congure the detailed informaon for the person, such as person's
ID type, ID No., country, etc., according to actual needs.
Perform this task when you need to congure the person's detailed informaon.
Steps
1.
Enter Access Control → Person and Card .
2.
Select an organizaon in the organizaon list to add the person and click Add.
Note
Input the person's basic iformaon rst. For details about conguring person's basic
informaon, refer to Congure Person's Basic Informaon .
3.
Click Details tab.
Access Controller User Manual
58
Loading ...
Loading ...
Loading ...