Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/50822182-ds-k2601-g/bg5a.png)
3.
Select a card reader to show its parameters on the right.
4.
Edit the card reader parameters.
Note
The displayed parameters may vary for dierent access control devices. There are part of
parameters listed as follows. Refer to the user manual of the device for more details.
Nickname
Edit the card reader name as desired.
Enable Card Reader
Select Yes to enable the card reader for card swiping.
OK LED Polarity/Error LED Polarity/Buzzer Polarity
Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the
card reader parameters. Generally, adopts the default sengs.
Minimum Card Swiping Interval
If the interval between card swiping of the same card is less than the set value, the card
swiping is invalid. You can set it as 0 to 255.
Max. Interval When Inpung Password
When you inpung the password on the card reader, if the interval between pressing two
digits is larger than the set value, the digits you pressed before will be cleared automacally.
Enable Failed Aempts Limit of Card Reading
Enable to report alarm when the card reading aempts reach the set value.
Max. Times of Card Swiping Failure
Set the max. failure aempts of reading card.
Enable Tampering Detecon
Enable the an-tamper detecon for the card reader.
Detect When Card Reader is Oine for
When the access control device cannot connect with the card reader for longer than the set
me, the card reader will turn oine automacally.
Buzzing Time
Set the card reader buzzing me. The available me ranges from 0 to 5,999s. 0 represents
connuous buzzing.
Card Reader Type/Card Reader Descripon
Get card reader type and descripon. They are read-only.
Fingerprint Recognion Level
Select the ngerprint recognion level in the drop-down list.
Default Card Reader Authencaon Mode
Access Controller User Manual
78
Loading ...
Loading ...
Loading ...