Loading ...
Loading ...
Loading ...
2.
Check Enable Cross-Controller An-passing Back to enable the funcon.
3.
Select Based on Network as the an-passing back mode.
4.
Select Entrance/Exit An-passing Back as the rule.
5.
Select a server in the drop-down list for judging the an-passing back.
Note
●
You can click Delete Card Swiping Record and select the card in the pop-up window to delete
the card swiping informaon in all devices.
●
Up to 5000 cards' swiping records can be stored in the selected server.
6.
Click Select Access Controller to select a device for an-passing back.
Note
Up to 64 devices with an-passing back funcon can be added.
7.
In the Card Reader area, check the checkboxes in the Enable An-passing Back column to select
the entrance card reader and the exit card reader.
Note
Up to one entrance carder and one exit card reader should be checked.
8.
Click Save.
Congure Mul-door Interlocking
You can set the mul-door interlocking between mulple doors of the same access control device.
To open one of the doors, other doors must keep closed. That means in the interlocking combined
door group, up to one door can be opened at the same me.
Perform this task when you want to realize interlocking between mulple doors.
Steps
Note
●
Mul-door Interlocking funcon is only supported by the access control device which has more
than one access control points (doors).
●
Either the an-passing back or mul-door interlocking funcon can be congured for an access
control device at the same me. For the conguraon of an-passing back funcon, refer to
Congure An-Passback .
1.
Click Access Control → Advanced Funcon → Mul-door Interlocking to enter the Mul-door
Interlocking page.
2.
Select an access control device in the list of Controller List panel.
3.
Click Add on the Mul-door Interlocking List panel to open Add Access Control Point to Interlock
window.
4.
Select access control point (s) from the list.
Access Controller User Manual
89
Loading ...
Loading ...
Loading ...