Loading ...
Loading ...
Loading ...
4. Set the serial port number, the baud rate, the meout value, the buzzing, or the card
number type.
5. Oponal: If the card is M1 card, and if you need to enable the M1 Card Encrypon funcon,
you should check Enable of M1 Card Encrypon and click Modify to select the sector.
Note
The M1 Card Encrypon funcon is supported by DS-K1F100-D8, DS-K1F100-D8E, and DS-
K1F180-D8E.
6. Click Save.
7. Place the card on the card enrollment staon.
8. Click Readto get the card No.
-
Manually Input
1. Input the card number manually.
2. Click Enter to input the card number.
7.
Click OK.
The card(s) will be issued to the person.
8.
Conrm to add the person.
-
Click OK to add the person and close the Add Person window.
-
Click Save and Connue to add the person and connue to add other persons .
Collect Person's Fingerprint Locally
When adding person, you can collect the person's ngerprint informaon via the ngerprint
recorder connected to the PC running the client.
Perform this task when you need to collect the person's ngerprint via the ngerprint recorder
connected to the PC running the client.
Steps
1.
Enter Access Control → Person and Card .
2.
Select an organizaon in the organizaon list to add the person and click Add.
Note
Input the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Person's Basic Informaon.
3.
Click Credenal → Fingerprint tab to enter the card credenal sengs page.
4.
Select the collecon mode as Local Collecon.
5.
Connect the ngerprint recorder to the PC and set its parameters.
1) Click Set Fingerprint Machine to open the seng ngerprint machine window.
2) Select the device type.
Access Controller User Manual
61
Loading ...
Loading ...
Loading ...