Loading ...
Loading ...
Loading ...
Disable Remain Open with First Card
Disable the funcon of remaining open with rst card.
First Card Authorizaon
All authencaons (except for the authencaons of super card, super password, super
ngerprint, duress card, duress code, and duress ngerprint) are allowed only aer the rst
card authorizaon.
Note
The First Card Authorizaon is eecve only on the current day. The authorizaon will be
expired aer 24:00 on the current day.
Note
You can swipe the rst card again to disable the rst card mode.
4.
Click Add on the First Card List panel.
5.
Select a card in the list and click OK to add the selected card as the rst card of the doors.
The added rst card will list on the First Card List panel.
6.
Oponal: Select a rst card from the list and click Delete to remove the card from the rst card
list.
7.
Click Save.
Congure An-Passback
You can set to only pass the access control point according to the specied path and only one
person could pass the access control point aer swiping the card.
Before You Start
Enable the an-passing back funcon of the access control device.
Perform this task when you want to congure the an-passing back for the access control device.
Steps
Note
Either the an-passing back or mul-door interlocking funcon can be congured for an access
control device at the same me. For the conguraon of mul-door interlocking, refer to
Congure Mul-door Interlocking .
1.
Click Access Control → Advanced Funcon → An-Passback to enter the an-passing back
conguraon page.
2.
Select an access control device in the list.
3.
Select a card reader as the beginning of the path in the First Card Reader eld.
4.
Click the text eld of the selected rst card reader in the Card Reader Aerward column to open
Select Card Reader dialog.
Access Controller User Manual
84
Loading ...
Loading ...
Loading ...