Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/50822182-ds-k2601-g/bg40.png)
Input the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at
least three kinds of following categories: upper case leers, lower case leers, numbers, and
special characters) in order to increase the security of your product. And we recommend you
reset your password regularly, especially in the high security system, reseng the password
monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
Add Oine Device
You can input 1 to enable adding the oine device, and then the soware will automacally
connect it when the oine device comes online. 0 indicates disabling this funcon.
Export to Group
You can input 1 to create a group by the device name (nickname). All the channels of the
device will be imported to the corresponding group by default. 0 indicates disabling this
funcon.
Channel Number
If you set 1 for Add Oine Device, input the channel number of the device. If you set 0 for Add
Oine Device, this eld is not required.
Alarm Input Number
If you set 1 for Add Oine Device, input the alarm input number of the device. If you set 0 for
Add Oine Device, this eld is not required.
Serial Port No.
If you set 5 as the adding mode, input the serial port No. for the access control device.
Baud Rate
If you set 5 as the adding mode, input the baud rate of the access control device.
DIP
If you set 5 as the adding mode, input the DIP address of the access control device.
Hik-Connect Account
If you set 6 as the adding mode, input the Hik-Connect account.
Hik-Connect Password
If you set 6 as the adding mode, input the Hik-Connect account password.
6.
Click
and select the template le.
7.
Click Add to import the devices.
Access Controller User Manual
52
Loading ...
Loading ...
Loading ...