Loading ...
Loading ...
Loading ...
Steps
1.
Enter Access Control → Person and Card .
2.
Select an organizaon in the organizaon list to add the person and click Add.
Note
Input the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon.
3.
Click Credenal → Card tab to enter the card credenal sengs page.
4.
Click Add and select General Card tab to enter the general card conguraon page.
5.
Set card parameters.
1) Select a card type for the general card.
Normal Card
By default, the card is normal card, which has no addional funcons.
Patrol Card
The card swiping acon can used for checking the working status of the inspecon sta.
The access permission of the inspecon sta is congurable.
Duress Card
The door can open by swiping the duress card when there is duress. At the same me, the
client can report the duress event.
Super Card
The card is valid for all the doors of the controller during the congured schedule.
2) Oponal: In the Remark eld, input the remark informaon for the card if needed.
Note
Up to 32 characters are allowed in the Remark eld.
3) Set the eecve me and expiry me of the card.
6.
Select the reading card mode and input the card number.
-
Access Controller Reader
1. Place the card on the reader of the Access Controller.
2. Click Read to get the card number.
-
Card Enrollment Staon
1. Connect the card enrollment staon with the PC running the client.
2. Click Set Card Enrollment Staon to set the card enrollment staon's parameters.
3. Select the Card Enrollment Staon type.
Note
Currently, the supported card reader types include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-
D8E, and DS-K1F180-D8E.
Access Controller User Manual
60
Loading ...
Loading ...
Loading ...