Hikvision DS-K2601-G User Manual

Loading ...

The real-me capture will be triggered.

Alarm Output

The alarm output will be triggered for nocaon.

Access Control Point

The door status of open, close, remain open, and remain close will be triggered.

Note

The door status of open, close, remain open, and remain close cannot be triggered at the

same me.

Click Save.

When the employee ID has entered on the selected card reader, it can trigger the linked acons

(congured in step 7).

Aer adding the device linkage, you can do one or more of the following:

Delete Linkage

Sengs

Select the congured linkage sengs in the device list and click Delete to

delete it.

Edit Linkage

Sengs

Select the congured linkage sengs in the device list and you can edit its

event source parameters, including event source and linkage target.

Congure Cross-Device Linkage

You can assign to trigger other access control device's acon by seng up a rule when the access

control event is triggered.

Note

It should be supported by the device.

Congure Cross-Device Linkage for Access Control Event

When the access control event is triggered and detected, it can trigger linkage acons of other

access control device, such as alarm output, opening door, etc. The event can be divided into four

types: device event, alarm input, door event, and card reader event.

Perform this task when you need to congure other access control device's linkage acons for

access control event.

Steps

Note

The devices should support this funcon.

Click Event Management → Cross-Device Linkage to enter the cross-device linkage conguraon

interface.

Access Controller User Manual

Loading ...

Hikvision DS-K2601-G Pro Series Access Controller