Hikvision DS-K2601-G User Manual

Loading ...

Congure Door Parameters

Aer adding the access control device, you can congure its access control point (door)

parameters.

Perform this task when you want to congure door (oor) parameters for the access control

device.

Steps

Click Access Control → Advanced Funcon → Access Control Parameters to enter Parameter

Sengs page.

Select an access controller and click to show the doors or oors of the selected access control

device.

Select a door or oor to show its parameters on the right.

Edit the door or oor parameters.

Door Magnec Sensor

Select the door contact status of Remain Closed or Remain Open.

Exit Buon Type

Select the exit buon status of Remain Closed or Remain Open.

Door Locked Time

Aer swiping the normal card and relay acon, the mer for locking the door starts working.

Extended Open Duraon

The door magnec can be enabled with appropriate delay aer the person swipes the card.

Door Open Timeout Alarm

The alarm can be triggered if the door has not been closed in a congured me period.

Duress Code

The door can open by inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Super Password

The specic person can open the door by inpung the super password.

Dismiss Code

Create a dismiss code which can be used to stop the buzzer of the card reader (by entering

the dismiss code on the keypad).

Note

●

The duress code, super code, and dismiss code should be dierent.

●

The duress code, super password, and the dismiss code should be dierent from the

authencaon password.

●

The duress code, super password, and the dismiss code should contain 4 to 8 digits.

Access Controller User Manual

Loading ...

Hikvision DS-K2601-G Pro Series Access Controller