Loading ...
Loading ...
Loading ...
2.
Click Device tab and select Hikvision Device as the device type to display the Online Device
area.
Figure 8-1 Online Device
3.
Select an online device from the Online Device area.
Note
For the inacve device, you need to create the password for it before you can add the device
properly. For detailed steps, refer to
Acvaon .
4.
Click Add to Client to open the device adding window.
5.
Input the required informaon.
Address
Input the device's IP address. The IP address of the device is obtained automacally in this
adding mode.
Port
The default value is 8000.
User Name
By default, the user name is admin.
Password
Input the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
you change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system, reseng the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
6.
Oponal: Check Synchronize Device Time to synchronize the device me with the PC running
the client aer adding the device to the client.
Access Controller User Manual
45
Loading ...
Loading ...
Loading ...